Gross Weight (kg) 0.0900
Master Carton MC 72
Inner Box IB 12
Pal 2520
Length [mm] ca. 140
Material brass, hardened steel
Designed to effectively marking points on hard materials especially prior to drilling.

Punches are designed for fast, precise marking points on the workpiece surface, eg. Wood, metal or plastic. The most commonly used to denote the point before drilling. The so-called. scoring facilitates the start of drilling, limiting the adverse effect of moving the drill from the surface of the material.
Selection is produced by hitting sharp end of the punch in the material. The traditional method of scoring involves the use of a hammer. Presented punches automatic label the material thanks to a strong inner spring moving steel, hardened spiers. Therefore they eliminate, the need to carry a heavy hammer.
Punch does not require charging spring -odbywa it automatically. Immediately after pressing the needle to the material and impact, we can repeat the operation by selecting another point.
Punch has a regulatory impact force used in order to optimally match the hardness of the labeled material.
Purpose / Application
For precise effective marking points on hard surfaces, eg. Before drilling. Immediately after pressing the needle to the material and impact, we can repeat the operation by selecting another point.
usage
Press punch sharp end to the material surface and press firmly. This will impact the needle and permanently mark the point.
BODY: BRASS, KNURLED, LENGTH: 125 MM